DB6 / 2714 Die Blocks
DIN 1.2714 (55NiCrMoV7) · AISI L6 (approx.) · JIS SKT4
DB6 / 2714 Die Blocks in ready stock at our Madurai godowns, pre-hardened blocks, Blocks to 600×400 mm. Band-saw cut to your sizes with mill test certificates on request.
I. Sizes & weights
Nominal weights at 7.85 g/cm³ · Blocks to 600×400 mm| W × T mm | kg / metre | kg / 6 m | |
|---|---|---|---|
| 20 × 3 | 0.47 | 2.83 | |
| 25 × 5 | 0.98 | 5.89 | |
| 32 × 6 | 1.51 | 9.04 | |
| 40 × 6 | 1.88 | 11.3 | |
| 50 × 8 | 3.14 | 18.8 | |
| 65 × 10 | 5.10 | 30.6 | |
| 75 × 12 | 7.07 | 42.4 | |
| 100 × 12 | 9.42 | 56.5 | |
| 125 × 16 | 15.7 | 94.2 | |
| 150 × 20 | 23.6 | 141.3 | |
| 200 × 25 | 39.3 | 235.5 |
II. Chemical composition (% by weight)
| Element | C | Mn | Cr | Ni | Mo | V |
|---|---|---|---|---|---|---|
| Min | 0.50 | 0.65 | 1.00 | 1.50 | 0.45 | 0.07 |
| Max | 0.60 | 0.95 | 1.20 | 1.80 | 0.55 | 0.12 |
Typical standard ranges. Every mill lot ships with its own test certificate on request.
III. Mechanical properties
- Supplied
- 370–410 HB pre-hardened
- Hardened
- 34–42 HRC
- Use
- Hammer and press forging dies
- Toughness
- High
IV. Supply condition
- Condition
- Pre-hardened blocks
- Machinability
- Fair
- Forms
- flat
- Cutting
- Band saw ±1 mm
- SKU
- SST-AES-18
V. Weigh it, then request it.
Locked to DB6DB6 · 7.85 g/cm³
W = T × W × L × ρ ÷ 1,000,000 · ρ = 7.85 g/cm³ · rounded to 0.1 kg. Theoretical weight; actual mill weight can vary by ±2–3%.
Hammer and press forging dies
About DB6
Can you cut DB6 to my sizes?
Yes. DB6 is band-saw cut to ±1 mm. Send piece sizes and quantities with your request; cutting is quoted with the material.
Is a mill test certificate provided with DB6?
An MTC is supplied with mill material on request, traceable to the heat number.
What sizes are in stock?
Blocks to 600×400 mm. For large tonnage, message us to reserve material.
What are the equivalents of DB6?
DIN 1.2714 (55NiCrMoV7), AISI L6 (approx.), JIS SKT4. Equivalents are close matches; confirm against your drawing's specification.
