D2 HCHCR D2 Cold Work Tool Steel
AISI D2 · DIN 1.2379 (X153CrMoV12) · JIS SKD11 · IS T160Cr12
HCHCR D2 Cold Work Tool Steel in ready stock at our Madurai godowns, annealed, Ø 10–300 mm · flats to 500 mm. Band-saw cut to your sizes with mill test certificates on request.
I. Sizes & weights
Nominal weights at 7.85 g/cm³ · Ø 10–300 mm · flats to 500 mm| Ø mm | kg / metre | kg / 6 m bar | |
|---|---|---|---|
| 10 | 0.62 | 3.70 | |
| 12 | 0.89 | 5.33 | |
| 16 | 1.58 | 9.47 | |
| 20 | 2.47 | 14.8 | |
| 25 | 3.85 | 23.1 | |
| 32 | 6.31 | 37.9 | |
| 40 | 9.86 | 59.2 | |
| 50 | 15.4 | 92.5 | |
| 63 | 24.5 | 146.8 | |
| 80 | 39.5 | 236.8 | |
| 100 | 61.7 | 369.9 | |
| 125 | 96.3 | 578.0 | |
| 160 | 157.8 | 947.0 | |
| 200 | 246.6 | 1,479.7 | |
| 250 | 385.3 | 2,312.0 | |
| 300 | 554.9 | 3,329.3 |
II. Chemical composition (% by weight)
| Element | C | Si | Mn | Cr | Mo | V |
|---|---|---|---|---|---|---|
| Min | 1.40 | – | – | 11.0 | 0.70 | 0.80 |
| Max | 1.60 | 0.60 | 0.60 | 13.0 | 1.20 | 1.10 |
Typical standard ranges. Every mill lot ships with its own test certificate on request.
III. Mechanical properties
- Annealed
- 255 HB max
- Hardened
- 58–62 HRC
- Use
- Blanking dies, shear blades
- Wear resistance
- Very high
IV. Supply condition
- Condition
- Annealed
- Machinability
- Difficult
- Forms
- round, flat
- Cutting
- Band saw ±1 mm
- SKU
- SST-AES-15
V. Weigh it, then request it.
Locked to D2D2 · 7.85 g/cm³
W = π × D² × L × ρ ÷ 4,000,000 · ρ = 7.85 g/cm³ · rounded to 0.1 kg. Theoretical weight; actual mill weight can vary by ±2–3%.
Blanking dies, shear blades, punches
About D2
Can you cut D2 to my sizes?
Yes. D2 is band-saw cut to ±1 mm. Send piece sizes and quantities with your request; cutting is quoted with the material.
Is a mill test certificate provided with D2?
An MTC is supplied with mill material on request, traceable to the heat number.
What sizes are in stock?
Ø 10–300 mm · flats to 500 mm. For large tonnage, message us to reserve material.
What are the equivalents of D2?
AISI D2, DIN 1.2379 (X153CrMoV12), JIS SKD11, IS T160Cr12. Equivalents are close matches; confirm against your drawing's specification.
