1018 SAE 1018 Carbon Steel Bars
AISI/SAE 1018 · BS 080A15 · DIN C15 (approx.)
SAE 1018 Carbon Steel Bars in ready stock at our Madurai godowns, cold drawn, Ø 6–150 mm. Band-saw cut to your sizes with mill test certificates on request.
I. Sizes & weights
Nominal weights at 7.85 g/cm³ · Ø 6–150 mm| Ø mm | kg / metre | kg / 6 m bar | |
|---|---|---|---|
| 6 | 0.22 | 1.33 | |
| 8 | 0.39 | 2.37 | |
| 10 | 0.62 | 3.70 | |
| 12 | 0.89 | 5.33 | |
| 16 | 1.58 | 9.47 | |
| 20 | 2.47 | 14.8 | |
| 25 | 3.85 | 23.1 | |
| 32 | 6.31 | 37.9 | |
| 40 | 9.86 | 59.2 | |
| 50 | 15.4 | 92.5 | |
| 63 | 24.5 | 146.8 | |
| 80 | 39.5 | 236.8 | |
| 100 | 61.7 | 369.9 | |
| 125 | 96.3 | 578.0 |
II. Chemical composition (% by weight)
| Element | C | Mn | S | P |
|---|---|---|---|---|
| Min | 0.15 | 0.60 | – | – |
| Max | 0.20 | 0.90 | 0.050 | 0.040 |
Typical standard ranges. Every mill lot ships with its own test certificate on request.
III. Mechanical properties
- Tensile
- 440 MPa (cold drawn)
- Yield
- 370 MPa
- Hardness
- 126 HB
- Elongation
- 15%
IV. Supply condition
- Condition
- Cold drawn
- Machinability
- Good
- Forms
- round, flat
- Cutting
- Band saw ±1 mm
- SKU
- SST-AES-10
V. Weigh it, then request it.
Locked to 10181018 · 7.85 g/cm³
W = π × D² × L × ρ ÷ 4,000,000 · ρ = 7.85 g/cm³ · rounded to 0.1 kg. Theoretical weight; actual mill weight can vary by ±2–3%.
Pins, bushes, carburised parts
About 1018
Can you cut 1018 to my sizes?
Yes. 1018 is band-saw cut to ±1 mm. Send piece sizes and quantities with your request; cutting is quoted with the material.
Is a mill test certificate provided with 1018?
An MTC is supplied with mill material on request, traceable to the heat number.
What sizes are in stock?
Ø 6–150 mm. For large tonnage, message us to reserve material.
What are the equivalents of 1018?
AISI/SAE 1018, BS 080A15, DIN C15 (approx.). Equivalents are close matches; confirm against your drawing's specification.