CI Continuous Cast CI Solid & Hollow Bars
IS 210 FG 260 · EN-GJL-250 (GG25) · ASTM A48 Class 35/40
Continuous Cast CI Solid & Hollow Bars in ready stock at our Madurai godowns, continuous cast, Solid Ø 20–400 · hollow to 500 OD. Band-saw cut to your sizes with mill test certificates on request.
I. Sizes & weights
Nominal weights at 7.2 g/cm³ · Solid Ø 20–400 · hollow to 500 OD| Ø mm | kg / metre | kg / 6 m bar | |
|---|---|---|---|
| 20 | 2.26 | 13.6 | |
| 25 | 3.53 | 21.2 | |
| 32 | 5.79 | 34.7 | |
| 40 | 9.05 | 54.3 | |
| 50 | 14.1 | 84.8 | |
| 63 | 22.4 | 134.7 | |
| 80 | 36.2 | 217.1 | |
| 100 | 56.5 | 339.3 | |
| 125 | 88.4 | 530.1 | |
| 160 | 144.8 | 868.6 | |
| 200 | 226.2 | 1,357.2 | |
| 250 | 353.4 | 2,120.6 | |
| 300 | 508.9 | 3,053.6 | |
| 350 | 692.7 | 4,156.3 | |
| 400 | 904.8 | 5,428.7 |
II. Chemical composition (% by weight)
| Element | C | Si | Mn | S | P |
|---|---|---|---|---|---|
| Min | 3.10 | 1.70 | 0.60 | – | – |
| Max | 3.40 | 2.20 | 0.90 | 0.12 | 0.15 |
Typical standard ranges. Every mill lot ships with its own test certificate on request.
III. Mechanical properties
- Tensile
- 250 MPa min
- Hardness
- 180–240 HB
- Damping
- Excellent
- Graphite
- Flake
IV. Supply condition
- Condition
- Continuous cast
- Machinability
- Excellent
- Forms
- round, tube, square
- Cutting
- Band saw ±1 mm
- SKU
- SST-CI-06
V. Weigh it, then request it.
Locked to CICI · 7.2 g/cm³
W = π × D² × L × ρ ÷ 4,000,000 · ρ = 7.2 g/cm³ · rounded to 0.1 kg. Theoretical weight; actual mill weight can vary by ±2–3%.
Bushes, sleeves, rings, pistons
About CI
Can you cut CI to my sizes?
Yes. CI is band-saw cut to ±1 mm. Send piece sizes and quantities with your request; cutting is quoted with the material.
Is a mill test certificate provided with CI?
An MTC is supplied with mill material on request, traceable to the heat number.
What sizes are in stock?
Solid Ø 20–400 · hollow to 500 OD. For large tonnage, message us to reserve material.
What are the equivalents of CI?
IS 210 FG 260, EN-GJL-250 (GG25), ASTM A48 Class 35/40. Equivalents are close matches; confirm against your drawing's specification.