Engineering Plastics · Dossier
PA6G Cast Nylon Oil-Filled Rods
PA6G oil-filled · Cast nylon MC901 (approx.)
Cast Nylon Oil-Filled Rods in ready stock: Ø 50–500 mm. Cut to length or sheet size on request.
Tensile80 MPa
RangeØ 50–500 mm
Limited
I. Sizes & weights
Nominal weights at 1.15 g/cm³ · Ø 50–500 mm| Ø mm | kg / metre | kg / 6 m bar | |
|---|---|---|---|
| 50 | 2.26 | 13.5 | |
| 63 | 3.58 | 21.5 | |
| 80 | 5.78 | 34.7 | |
| 100 | 9.03 | 54.2 | |
| 125 | 14.1 | 84.7 | |
| 160 | 23.1 | 138.7 | |
| 200 | 36.1 | 216.8 | |
| 250 | 56.5 | 338.7 | |
| 300 | 81.3 | 487.7 | |
| 350 | 110.6 | 663.9 | |
| 400 | 144.5 | 867.1 |
III. Mechanical properties
- Density
- 1.15 g/cm³
- Tensile
- 80 MPa
- Max service
- 105 °C
- Friction
- Low, self-lubricating
IV. Supply condition
- Condition
- Cast, oil filled (green / yellow)
- Machinability
- Excellent
- Forms
- round, tube
- Cutting
- Band saw ±1 mm
- SKU
- SST-EP-03
V. Weigh it, then request it.
Locked to PA6GShape
Material
PA6G · 1.15 g/cm³
W = π × D² × L × ρ ÷ 4,000,000 · ρ = 1.15 g/cm³ · rounded to 0.1 kg. Theoretical weight; actual mill weight can vary by ±2–3%.
Applications
Sheaves, heavy bushes, crane pads
Questions
About PA6G
Can you cut PA6G to my sizes?
Yes. PA6G is band-saw cut to ±1 mm. Send piece sizes and quantities with your request; cutting is quoted with the material.
Is a mill test certificate provided with PA6G?
An MTC is supplied with mill material on request, traceable to the heat number.
What sizes are in stock?
Ø 50–500 mm. For large tonnage, message us to reserve material.
What are the equivalents of PA6G?
PA6G oil-filled, Cast nylon MC901 (approx.). Equivalents are close matches; confirm against your drawing's specification.
