IS 2062 Mild Steel Flat Bars
IS 2062 E250 · EN S275JR · ASTM A36 · JIS SS400
Mild Steel Flat Bars in ready stock at our Madurai godowns, hot rolled, 20×3 to 200×40 mm. Band-saw cut to your sizes with mill test certificates on request.
I. Sizes & weights
Nominal weights at 7.85 g/cm³ · 20×3 to 200×40 mm| W × T mm | kg / metre | kg / 6 m | |
|---|---|---|---|
| 20 × 3 | 0.47 | 2.83 | |
| 25 × 5 | 0.98 | 5.89 | |
| 32 × 6 | 1.51 | 9.04 | |
| 40 × 6 | 1.88 | 11.3 | |
| 50 × 8 | 3.14 | 18.8 | |
| 65 × 10 | 5.10 | 30.6 | |
| 75 × 12 | 7.07 | 42.4 | |
| 100 × 12 | 9.42 | 56.5 | |
| 125 × 16 | 15.7 | 94.2 | |
| 150 × 20 | 23.6 | 141.3 | |
| 200 × 25 | 39.3 | 235.5 |
II. Chemical composition (% by weight)
| Element | C | Mn | Si | S | P |
|---|---|---|---|---|---|
| Min | – | – | – | – | – |
| Max | 0.23 | 1.50 | 0.40 | 0.045 | 0.045 |
Typical standard ranges. Every mill lot ships with its own test certificate on request.
III. Mechanical properties
- Tensile
- 410 MPa min
- Yield
- 250 MPa min
- Elongation
- 23% min
- Bend
- Passes 180°
IV. Supply condition
- Condition
- Hot rolled
- Machinability
- Good
- Forms
- flat
- Cutting
- Band saw ±1 mm
- SKU
- SST-MSS-04
V. Weigh it, then request it.
Locked to IS 2062IS 2062 · 7.85 g/cm³
W = T × W × L × ρ ÷ 1,000,000 · ρ = 7.85 g/cm³ · rounded to 0.1 kg. Theoretical weight; actual mill weight can vary by ±2–3%.
Brackets, frames, base strips, conveyors
About IS 2062
Can you cut IS 2062 to my sizes?
Yes. IS 2062 is band-saw cut to ±1 mm. Send piece sizes and quantities with your request; cutting is quoted with the material.
Is a mill test certificate provided with IS 2062?
An MTC is supplied with mill material on request, traceable to the heat number.
What sizes are in stock?
20×3 to 200×40 mm. For large tonnage, message us to reserve material.
What are the equivalents of IS 2062?
IS 2062 E250, EN S275JR, ASTM A36, JIS SS400. Equivalents are close matches; confirm against your drawing's specification.
