CZ108 Brass Sheets & Coils
BS CZ108 · UNS C27200 · EN CuZn37 (CW508L) · IS 4170
Brass Sheets & Coils in ready stock at our Madurai godowns, half hard / annealed, 0.3–6 mm thick. Band-saw cut to your sizes with mill test certificates on request.
I. Sizes & weights
Nominal weights at 8.5 g/cm³ · 0.3–6 mm thick| Thickness mm | kg / m² | kg / sheet 1250 × 2500 | |
|---|---|---|---|
| 0.8 | 6.80 | 21.3 | |
| 1 | 8.50 | 26.6 | |
| 1.6 | 13.6 | 42.5 | |
| 2 | 17.0 | 53.1 | |
| 3 | 25.5 | 79.7 | |
| 5 | 42.5 | 132.8 | |
| 6 | 51.0 | 159.4 |
II. Chemical composition (% by weight)
| Element | Cu | Pb | Fe | Zn |
|---|---|---|---|---|
| Min | 62.0 | – | – | rem. |
| Max | 65.0 | 0.10 | 0.10 | – |
Typical standard ranges. Every mill lot ships with its own test certificate on request.
III. Mechanical properties
- Tensile
- 340–480 MPa
- Hardness
- 90–140 HV
- Elongation
- 15–40%
- Conductivity
- 27% IACS
IV. Supply condition
- Condition
- Half hard / annealed
- Machinability
- Fair
- Forms
- plate
- Cutting
- Band saw ±1 mm
- SKU
- SST-NFM-04
V. Weigh it, then request it.
Locked to CZ108CZ108 · 8.5 g/cm³
W = T × W × L × ρ ÷ 1,000,000 · ρ = 8.5 g/cm³ · rounded to 0.1 kg. Theoretical weight; actual mill weight can vary by ±2–3%.
Pressings, nameplates, decor
About CZ108
Can you cut CZ108 to my sizes?
Yes. CZ108 is band-saw cut to ±1 mm. Send piece sizes and quantities with your request; cutting is quoted with the material.
Is a mill test certificate provided with CZ108?
An MTC is supplied with mill material on request, traceable to the heat number.
What sizes are in stock?
0.3–6 mm thick. For large tonnage, message us to reserve material.
What are the equivalents of CZ108?
BS CZ108, UNS C27200, EN CuZn37 (CW508L), IS 4170. Equivalents are close matches; confirm against your drawing's specification.
