Cu ETP Copper Plates & Sheets
UNS C11000 (ETP) · EN Cu-ETP (CW004A) · IS 191 ETP · BS C101
Copper Plates & Sheets in ready stock at our Madurai godowns, half hard / hard drawn, 0.5–25 mm thick. Band-saw cut to your sizes with mill test certificates on request.
I. Sizes & weights
Nominal weights at 8.96 g/cm³ · 0.5–25 mm thick| Thickness mm | kg / m² | kg / sheet 1250 × 2500 | |
|---|---|---|---|
| 0.8 | 7.17 | 22.4 | |
| 1 | 8.96 | 28.0 | |
| 1.6 | 14.3 | 44.8 | |
| 2 | 17.9 | 56.0 | |
| 3 | 26.9 | 84.0 | |
| 5 | 44.8 | 140.0 | |
| 6 | 53.8 | 168.0 | |
| 8 | 71.7 | 224.0 | |
| 10 | 89.6 | 280.0 | |
| 12 | 107.5 | 336.0 | |
| 16 | 143.4 | 448.0 | |
| 20 | 179.2 | 560.0 | |
| 25 | 224.0 | 700.0 |
II. Chemical composition (% by weight)
| Element | Cu | O | Pb | Fe |
|---|---|---|---|---|
| Min | 99.90 | 0.02 | – | – |
| Max | – | 0.04 | 0.005 | 0.005 |
Typical standard ranges. Every mill lot ships with its own test certificate on request.
III. Mechanical properties
- Tensile
- 220–385 MPa (temper)
- Conductivity
- 100% IACS min
- Hardness
- 40–110 HV
- Elongation
- 6–45%
IV. Supply condition
- Condition
- Half hard / hard drawn
- Machinability
- Fair
- Forms
- plate
- Cutting
- Band saw ±1 mm
- SKU
- SST-NFM-07
V. Weigh it, then request it.
Locked to Cu ETPCu ETP · 8.96 g/cm³
W = T × W × L × ρ ÷ 1,000,000 · ρ = 8.96 g/cm³ · rounded to 0.1 kg. Theoretical weight; actual mill weight can vary by ±2–3%.
Heat exchangers, earthing plates
About Cu ETP
Can you cut Cu ETP to my sizes?
Yes. Cu ETP is band-saw cut to ±1 mm. Send piece sizes and quantities with your request; cutting is quoted with the material.
Is a mill test certificate provided with Cu ETP?
An MTC is supplied with mill material on request, traceable to the heat number.
What sizes are in stock?
0.5–25 mm thick. For large tonnage, message us to reserve material.
What are the equivalents of Cu ETP?
UNS C11000 (ETP), EN Cu-ETP (CW004A), IS 191 ETP, BS C101. Equivalents are close matches; confirm against your drawing's specification.
