SS 316 Plates & Sheets
AISI 316 / 316L (S31600 / S31603) · DIN 1.4401 / 1.4404 · JIS SUS316 / SUS316L
SS 316 Plates & Sheets in ready stock at our Madurai godowns, solution annealed, 0.5–40 mm thick. Band-saw cut to your sizes with mill test certificates on request.
I. Sizes & weights
Nominal weights at 8 g/cm³ · 0.5–40 mm thick| Thickness mm | kg / m² | kg / sheet 1250 × 2500 | |
|---|---|---|---|
| 0.8 | 6.40 | 20.0 | |
| 1 | 8.00 | 25.0 | |
| 1.6 | 12.8 | 40.0 | |
| 2 | 16.0 | 50.0 | |
| 3 | 24.0 | 75.0 | |
| 5 | 40.0 | 125.0 | |
| 6 | 48.0 | 150.0 | |
| 8 | 64.0 | 200.0 | |
| 10 | 80.0 | 250.0 | |
| 12 | 96.0 | 300.0 | |
| 16 | 128.0 | 400.0 | |
| 20 | 160.0 | 500.0 | |
| 25 | 200.0 | 625.0 | |
| 32 | 256.0 | 800.0 | |
| 40 | 320.0 | 1,000.0 |
II. Chemical composition (% by weight)
| Element | C | Mn | Si | Cr | Ni | Mo |
|---|---|---|---|---|---|---|
| Min | – | – | – | 16.0 | 10.0 | 2.0 |
| Max | 0.08 (L: 0.03) | 2.00 | 0.75 | 18.0 | 14.0 | 3.0 |
Typical standard ranges. Every mill lot ships with its own test certificate on request.
III. Mechanical properties
- Tensile
- 515 MPa min
- Yield
- 205 MPa min
- Hardness
- 217 HB max
- Elongation
- 40% min
IV. Supply condition
- Condition
- Solution annealed
- Machinability
- Fair
- Forms
- plate
- Cutting
- Band saw ±1 mm
- SKU
- SST-SS-06
V. Weigh it, then request it.
Locked to SS 316SS 316 · 8 g/cm³
W = T × W × L × ρ ÷ 1,000,000 · ρ = 8 g/cm³ · rounded to 0.1 kg. Theoretical weight; actual mill weight can vary by ±2–3%.
Chemical tanks, marine fittings
About SS 316
Can you cut SS 316 to my sizes?
Yes. SS 316 is band-saw cut to ±1 mm. Send piece sizes and quantities with your request; cutting is quoted with the material.
Is a mill test certificate provided with SS 316?
An MTC is supplied with mill material on request, traceable to the heat number.
What sizes are in stock?
0.5–40 mm thick. For large tonnage, message us to reserve material.
What are the equivalents of SS 316?
AISI 316 / 316L (S31600 / S31603), DIN 1.4401 / 1.4404, JIS SUS316 / SUS316L. Equivalents are close matches; confirm against your drawing's specification.
