IS 3502 Chequered Plates
IS 3502 · EN S235 tread · ASTM A786
Chequered Plates in ready stock at our Madurai godowns, hot rolled, raised pattern, 2.5–10 mm thick · 1250 / 1500 mm wide. Band-saw cut to your sizes with mill test certificates on request.
I. Sizes & weights
Nominal weights at 7.85 g/cm³ · 2.5–10 mm thick · 1250 / 1500 mm wide| Thickness mm | kg / m² | kg / sheet 1250 × 2500 | |
|---|---|---|---|
| 3 | 23.5 | 73.6 | |
| 5 | 39.3 | 122.7 | |
| 6 | 47.1 | 147.2 | |
| 8 | 62.8 | 196.3 | |
| 10 | 78.5 | 245.3 |
II. Chemical composition (% by weight)
| Element | C | Mn | S | P |
|---|---|---|---|---|
| Min | – | – | – | – |
| Max | 0.23 | 1.50 | 0.045 | 0.045 |
Typical standard ranges. Every mill lot ships with its own test certificate on request.
III. Mechanical properties
- Tensile
- 410 MPa min
- Yield
- 250 MPa min
- Pattern
- Diamond / 4-bar
- Elongation
- 20% min
IV. Supply condition
- Condition
- Hot rolled, raised pattern
- Machinability
- Good
- Forms
- plate
- Cutting
- Band saw ±1 mm
- SKU
- SST-MSS-07
V. Weigh it, then request it.
Locked to IS 3502IS 3502 · 7.85 g/cm³
W = T × W × L × ρ ÷ 1,000,000 · ρ = 7.85 g/cm³ · rounded to 0.1 kg. Theoretical weight; actual mill weight can vary by ±2–3%.
Floors, stair treads, platforms, trailers
About IS 3502
Can you cut IS 3502 to my sizes?
Yes. IS 3502 is band-saw cut to ±1 mm. Send piece sizes and quantities with your request; cutting is quoted with the material.
Is a mill test certificate provided with IS 3502?
An MTC is supplied with mill material on request, traceable to the heat number.
What sizes are in stock?
2.5–10 mm thick · 1250 / 1500 mm wide. For large tonnage, message us to reserve material.
What are the equivalents of IS 3502?
IS 3502, EN S235 tread, ASTM A786. Equivalents are close matches; confirm against your drawing's specification.
