ISA MS Unequal Angles
IS 2062 E250 · EN S275JR · ASTM A36 · JIS SS400
MS Unequal Angles in ready stock at our Madurai godowns, hot rolled, 40×25×3 to 150×115×16 mm. Band-saw cut to your sizes with mill test certificates on request.
I. Sizes & weights
Nominal weights at 7.85 g/cm³ · 40×25×3 to 150×115×16 mm| A × B × T mm | kg / metre | kg / 6 m | |
|---|---|---|---|
| 25 × 25 × 3 | 1.11 | 6.64 | |
| 40 × 40 × 5 | 2.94 | 17.7 | |
| 50 × 50 × 6 | 4.43 | 26.6 | |
| 65 × 65 × 6 | 5.84 | 35.0 | |
| 75 × 75 × 8 | 8.92 | 53.5 | |
| 90 × 90 × 8 | 10.8 | 64.8 | |
| 100 × 100 × 10 | 14.9 | 89.5 |
II. Chemical composition (% by weight)
| Element | C | Mn | Si | S | P |
|---|---|---|---|---|---|
| Min | – | – | – | – | – |
| Max | 0.23 | 1.50 | 0.40 | 0.045 | 0.045 |
Typical standard ranges. Every mill lot ships with its own test certificate on request.
III. Mechanical properties
- Tensile
- 410 MPa min
- Yield
- 250 MPa min
- Elongation
- 23% min
- Bend
- Passes 180°
IV. Supply condition
- Condition
- Hot rolled
- Machinability
- Good
- Forms
- angle
- Cutting
- Band saw ±1 mm
- SKU
- SST-MSS-09
V. Weigh it, then request it.
Locked to ISAISA · 7.85 g/cm³
W = (A + B − T) × T × L × ρ ÷ 1,000,000 · ρ = 7.85 g/cm³ · rounded to 0.1 kg. Theoretical weight; actual mill weight can vary by ±2–3%.
Lintels, frames, brackets
About ISA
Can you cut ISA to my sizes?
Yes. ISA is band-saw cut to ±1 mm. Send piece sizes and quantities with your request; cutting is quoted with the material.
Is a mill test certificate provided with ISA?
An MTC is supplied with mill material on request, traceable to the heat number.
What sizes are in stock?
40×25×3 to 150×115×16 mm. For large tonnage, message us to reserve material.
What are the equivalents of ISA?
IS 2062 E250, EN S275JR, ASTM A36, JIS SS400. Equivalents are close matches; confirm against your drawing's specification.
