ISMC MS Channels (ISMC)
IS 2062 E250 · EN S275JR · ASTM A36 · JIS SS400
MS Channels (ISMC) in ready stock at our Madurai godowns, hot rolled, ISMC 75 to ISMC 400. Band-saw cut to your sizes with mill test certificates on request.
I. Sizes & weights
Nominal weights at 7.85 g/cm³ · ISMC 75 to ISMC 400| Designation | kg / metre | kg / 12 m | |
|---|---|---|---|
| ISMC 75 | 6.80 | 81.6 | |
| ISMC 100 | 9.20 | 110.4 | |
| ISMC 125 | 12.7 | 152.4 | |
| ISMC 150 | 16.4 | 196.8 | |
| ISMC 175 | 19.1 | 229.2 | |
| ISMC 200 | 22.1 | 265.2 | |
| ISMC 225 | 25.9 | 310.8 | |
| ISMC 250 | 30.4 | 364.8 | |
| ISMC 300 | 35.8 | 429.6 | |
| ISMC 400 | 49.4 | 592.8 |
II. Chemical composition (% by weight)
| Element | C | Mn | Si | S | P |
|---|---|---|---|---|---|
| Min | – | – | – | – | – |
| Max | 0.23 | 1.50 | 0.40 | 0.045 | 0.045 |
Typical standard ranges. Every mill lot ships with its own test certificate on request.
III. Mechanical properties
- Tensile
- 410 MPa min
- Yield
- 250 MPa min
- Elongation
- 23% min
- Bend
- Passes 180°
IV. Supply condition
- Condition
- Hot rolled
- Machinability
- Good
- Forms
- channel
- Cutting
- Band saw ±1 mm
- SKU
- SST-MSS-10
V. Weigh it, then request it.
Locked to ISMCISMC · 7.85 g/cm³
W = IS 808 kg/m × L ÷ 1,000 · ρ = 7.85 g/cm³ · rounded to 0.1 kg. Theoretical weight; actual mill weight can vary by ±2–3%.
Purlins, frames, trailer chassis, staircases
About ISMC
Can you cut ISMC to my sizes?
Yes. ISMC is band-saw cut to ±1 mm. Send piece sizes and quantities with your request; cutting is quoted with the material.
Is a mill test certificate provided with ISMC?
An MTC is supplied with mill material on request, traceable to the heat number.
What sizes are in stock?
ISMC 75 to ISMC 400. For large tonnage, message us to reserve material.
What are the equivalents of ISMC?
IS 2062 E250, EN S275JR, ASTM A36, JIS SS400. Equivalents are close matches; confirm against your drawing's specification.
