6061 Aluminium 6061 T6 Round Bars
AA 6061 · EN AW-6061 (AlMg1SiCu) · IS 64430 (HE20) · DIN 3.3211
Aluminium 6061 T6 Round Bars in ready stock at our Madurai godowns, t6 / t651, Ø 6–300 mm · plates 6–150 mm. Band-saw cut to your sizes with mill test certificates on request.
I. Sizes & weights
Nominal weights at 2.7 g/cm³ · Ø 6–300 mm · plates 6–150 mm| Ø mm | kg / metre | kg / 6 m bar | |
|---|---|---|---|
| 6 | 0.08 | 0.46 | |
| 8 | 0.14 | 0.81 | |
| 10 | 0.21 | 1.27 | |
| 12 | 0.31 | 1.83 | |
| 16 | 0.54 | 3.26 | |
| 20 | 0.85 | 5.09 | |
| 25 | 1.33 | 7.95 | |
| 32 | 2.17 | 13.0 | |
| 40 | 3.39 | 20.4 | |
| 50 | 5.30 | 31.8 | |
| 63 | 8.42 | 50.5 | |
| 80 | 13.6 | 81.4 | |
| 100 | 21.2 | 127.2 | |
| 125 | 33.1 | 198.8 | |
| 160 | 54.3 | 325.7 | |
| 200 | 84.8 | 508.9 | |
| 250 | 132.5 | 795.2 | |
| 300 | 190.9 | 1,145.1 |
II. Chemical composition (% by weight)
| Element | Mg | Si | Cu | Cr | Fe |
|---|---|---|---|---|---|
| Min | 0.80 | 0.40 | 0.15 | 0.04 | – |
| Max | 1.20 | 0.80 | 0.40 | 0.35 | 0.70 |
Typical standard ranges. Every mill lot ships with its own test certificate on request.
III. Mechanical properties
- Tensile
- 310 MPa (T6)
- Yield
- 276 MPa
- Hardness
- 95 HB
- Elongation
- 12%
IV. Supply condition
- Condition
- T6 / T651
- Machinability
- Good
- Forms
- round, flat, plate
- Cutting
- Band saw ±1 mm
- SKU
- SST-NFM-14
V. Weigh it, then request it.
Locked to 60616061 · 2.7 g/cm³
W = π × D² × L × ρ ÷ 4,000,000 · ρ = 2.7 g/cm³ · rounded to 0.1 kg. Theoretical weight; actual mill weight can vary by ±2–3%.
Jigs, fixtures, automotive parts
About 6061
Can you cut 6061 to my sizes?
Yes. 6061 is band-saw cut to ±1 mm. Send piece sizes and quantities with your request; cutting is quoted with the material.
Is a mill test certificate provided with 6061?
An MTC is supplied with mill material on request, traceable to the heat number.
What sizes are in stock?
Ø 6–300 mm · plates 6–150 mm. For large tonnage, message us to reserve material.
What are the equivalents of 6061?
AA 6061, EN AW-6061 (AlMg1SiCu), IS 64430 (HE20), DIN 3.3211. Equivalents are close matches; confirm against your drawing's specification.
