7075 Aluminium 7075 Aircraft Grade Bars
AA 7075 · EN AW-7075 (AlZn5.5MgCu) · DIN 3.4365
Aluminium 7075 Aircraft Grade Bars in ready stock at our Madurai godowns, t6 / t651, Ø 10–200 mm · plates 6–100 mm. Band-saw cut to your sizes with mill test certificates on request.
I. Sizes & weights
Nominal weights at 2.81 g/cm³ · Ø 10–200 mm · plates 6–100 mm| Ø mm | kg / metre | kg / 6 m bar | |
|---|---|---|---|
| 10 | 0.22 | 1.32 | |
| 12 | 0.32 | 1.91 | |
| 16 | 0.56 | 3.39 | |
| 20 | 0.88 | 5.30 | |
| 25 | 1.38 | 8.28 | |
| 32 | 2.26 | 13.6 | |
| 40 | 3.53 | 21.2 | |
| 50 | 5.52 | 33.1 | |
| 63 | 8.76 | 52.6 | |
| 80 | 14.1 | 84.7 | |
| 100 | 22.1 | 132.4 | |
| 125 | 34.5 | 206.9 | |
| 160 | 56.5 | 339.0 | |
| 200 | 88.3 | 529.7 |
II. Chemical composition (% by weight)
| Element | Zn | Mg | Cu | Cr | Fe |
|---|---|---|---|---|---|
| Min | 5.1 | 2.1 | 1.2 | 0.18 | – |
| Max | 6.1 | 2.9 | 2.0 | 0.28 | 0.50 |
Typical standard ranges. Every mill lot ships with its own test certificate on request.
III. Mechanical properties
- Tensile
- 572 MPa (T6)
- Yield
- 503 MPa
- Hardness
- 150 HB
- Elongation
- 11%
IV. Supply condition
- Condition
- T6 / T651
- Machinability
- Good
- Forms
- round, plate
- Cutting
- Band saw ±1 mm
- SKU
- SST-NFM-16
V. Weigh it, then request it.
Locked to 70757075 · 2.81 g/cm³
W = π × D² × L × ρ ÷ 4,000,000 · ρ = 2.81 g/cm³ · rounded to 0.1 kg. Theoretical weight; actual mill weight can vary by ±2–3%.
Moulds, aerospace, high-stress parts
About 7075
Can you cut 7075 to my sizes?
Yes. 7075 is band-saw cut to ±1 mm. Send piece sizes and quantities with your request; cutting is quoted with the material.
Is a mill test certificate provided with 7075?
An MTC is supplied with mill material on request, traceable to the heat number.
What sizes are in stock?
Ø 10–200 mm · plates 6–100 mm. For large tonnage, message us to reserve material.
What are the equivalents of 7075?
AA 7075, EN AW-7075 (AlZn5.5MgCu), DIN 3.4365. Equivalents are close matches; confirm against your drawing's specification.
