5083 Aluminium 5083 Marine Grade Plates
AA 5083 · EN AW-5083 (AlMg4.5Mn0.7) · IS 54300 · DIN 3.3547
Aluminium 5083 Marine Grade Plates in ready stock at our Madurai godowns, h111 / h321, 3–100 mm thick. Band-saw cut to your sizes with mill test certificates on request.
I. Sizes & weights
Nominal weights at 2.66 g/cm³ · 3–100 mm thick| Thickness mm | kg / m² | kg / sheet 1250 × 2500 | |
|---|---|---|---|
| 3 | 7.98 | 24.9 | |
| 5 | 13.3 | 41.6 | |
| 6 | 16.0 | 49.9 | |
| 8 | 21.3 | 66.5 | |
| 10 | 26.6 | 83.1 | |
| 12 | 31.9 | 99.8 | |
| 16 | 42.6 | 133.0 | |
| 20 | 53.2 | 166.3 | |
| 25 | 66.5 | 207.8 | |
| 32 | 85.1 | 266.0 | |
| 40 | 106.4 | 332.5 | |
| 50 | 133.0 | 415.6 | |
| 63 | 167.6 | 523.7 | |
| 80 | 212.8 | 665.0 | |
| 100 | 266.0 | 831.3 |
II. Chemical composition (% by weight)
| Element | Mg | Mn | Cr | Fe | Si |
|---|---|---|---|---|---|
| Min | 4.0 | 0.40 | 0.05 | – | – |
| Max | 4.9 | 1.00 | 0.25 | 0.40 | 0.40 |
Typical standard ranges. Every mill lot ships with its own test certificate on request.
III. Mechanical properties
- Tensile
- 275–350 MPa
- Yield
- 125 MPa min
- Elongation
- 16%
- Marine
- Excellent corrosion resistance
IV. Supply condition
- Condition
- H111 / H321
- Machinability
- Fair
- Forms
- plate
- Cutting
- Band saw ±1 mm
- SKU
- SST-NFM-17
V. Weigh it, then request it.
Locked to 50835083 · 2.66 g/cm³
W = T × W × L × ρ ÷ 1,000,000 · ρ = 2.66 g/cm³ · rounded to 0.1 kg. Theoretical weight; actual mill weight can vary by ±2–3%.
Boat building, tankers, cryogenics
About 5083
Can you cut 5083 to my sizes?
Yes. 5083 is band-saw cut to ±1 mm. Send piece sizes and quantities with your request; cutting is quoted with the material.
Is a mill test certificate provided with 5083?
An MTC is supplied with mill material on request, traceable to the heat number.
What sizes are in stock?
3–100 mm thick. For large tonnage, message us to reserve material.
What are the equivalents of 5083?
AA 5083, EN AW-5083 (AlMg4.5Mn0.7), IS 54300, DIN 3.3547. Equivalents are close matches; confirm against your drawing's specification.
