3003 Aluminium Chequered Sheets
AA 3003 / 1100 · EN AW-3003 · IS 31000
Aluminium Chequered Sheets in ready stock at our Madurai godowns, h14 / h22, 1.5–6 mm thick. Band-saw cut to your sizes with mill test certificates on request.
I. Sizes & weights
Nominal weights at 2.7 g/cm³ · 1.5–6 mm thick| Thickness mm | kg / m² | kg / sheet 1250 × 2500 | |
|---|---|---|---|
| 1.6 | 4.32 | 13.5 | |
| 2 | 5.40 | 16.9 | |
| 3 | 8.10 | 25.3 | |
| 5 | 13.5 | 42.2 | |
| 6 | 16.2 | 50.6 |
II. Chemical composition (% by weight)
| Element | Mn | Fe | Si | Cu |
|---|---|---|---|---|
| Min | 1.0 | – | – | 0.05 |
| Max | 1.5 | 0.70 | 0.60 | 0.20 |
Typical standard ranges. Every mill lot ships with its own test certificate on request.
III. Mechanical properties
- Tensile
- 130–180 MPa
- Pattern
- 5-bar / diamond
- Thickness
- 1.5–6 mm
- Slip resistance
- Good
IV. Supply condition
- Condition
- H14 / H22
- Machinability
- Good
- Forms
- plate
- Cutting
- Band saw ±1 mm
- SKU
- SST-NFM-18
V. Weigh it, then request it.
Locked to 30033003 · 2.7 g/cm³
W = T × W × L × ρ ÷ 1,000,000 · ρ = 2.7 g/cm³ · rounded to 0.1 kg. Theoretical weight; actual mill weight can vary by ±2–3%.
Vehicle floors, ramps, stairs
About 3003
Can you cut 3003 to my sizes?
Yes. 3003 is band-saw cut to ±1 mm. Send piece sizes and quantities with your request; cutting is quoted with the material.
Is a mill test certificate provided with 3003?
An MTC is supplied with mill material on request, traceable to the heat number.
What sizes are in stock?
1.5–6 mm thick. For large tonnage, message us to reserve material.
What are the equivalents of 3003?
AA 3003 / 1100, EN AW-3003, IS 31000. Equivalents are close matches; confirm against your drawing's specification.
